F Series
Alpha: 0.00390, Temperare Range: -200 to +661 degrees C°
“X” designates a “Fully Supported Coil Helix” in the internal ceramic bore-hole. This increases the typical maximum vibration level by 15 g’s. ie. PT100/15AX
“*” designates Platinum/Rhodium Lead Wires which increases the typical Tensile Strength from 19-23 kpsi to 57-61 kpsi. Ie. PT100/15A*
“G” designates a Hermetic Glass Coating which seals out moisture and off-gassing BUT requires that the Lead Wire be Platinum/Rhodium. The “Glass Coating” adds approximately .003″-.005″ to the O.D. (Outside Diameter). Ie. PT100/15A*G In addition, you can get ALL three modifications. Ie. Pt100/15AX*G
PART NUMBER | TEMP. COEFFICIENT OF RESISTANCE ALPHA/ DEG C | NOMINAL RESISTANCE AT 0 DEG C OHMS | L | O.D. | TEMP. RANGE DEG C |
F100/15C | 0.00390 | 100 | 15 | 0.9 | -200 TO +661 |
F100/15B | 0.00390 | 100 | 15 | 1.2 | -200 TO +661 |
F100/8A | 0.00390 | 100 | 8 | 1.6 | -200 TO +661 |
F100/12A | 0.00390 | 100 | 12 | 1.6 | -200 TO +661 |
F2100/12A | 0.00390 | 2 X 100 | 12 | 1.6 | -200 TO +661 |
F100/15A | 0.00390 | 100 | 15 | 1.6 | -200 TO +661 |
F2100/15A | 0.00390 | 2 X 100 | 15 | 1.6 | -200 TO +661 |
F100/1A | 0.00390 | 100 | 25 | 1.6 | -200 TO +661 |
F2100/1A | 0.00390 | 2 X 100 | 25 | 1.6 | -200 TO +661 |
F100/6D | 0.00390 | 100 | 6 | 2.0 | -200 TO +661 |
F100/15D | 0.00390 | 100 | 15 | 2.0 | -200 TO +661 |
F2100/15D | 0.00390 | 2 X 100 | 15 | 2.0 | -200 TO +661 |
F100/20U | 0.00390 | 100 | 20 | 2.8 | -200 TO +661 |
F2100/20U | 0.00390 | 2 X 100 | 20 | 2.8 | -200 TO +661 |
F100/1U | 0.00390 | 100 | 25 | 2.8 | -200 TO +661 |
F2100/1U | 0.00390 | 2 X 100 | 25 | 2.8 | -200 TO +661 |
F100/15P | 0.00390 | 100 | 15 | 3.2 | -200 TO +661 |
F2100/15P | 0.00390 | 2 X 100 | 15 | 3.2 | -200 TO +661 |
F100/1P | 0.00390 | 100 | 25 | 3.2 | -200 TO +661 |
F2100/1P | 0.00390 | 2 X 100 | 25 | 3.2 | -200 TO +661 |
F100/30H | 0.00390 | 100 | 30 | 4.5 | -200 TO +661 |
F2100/30H | 0.00390 | 2 X 100 | 30 | 4.5 | -200 TO +661 |
Custom elements are available!
Please contact us for inquiries. For high vibration applications, elements with fully supported windings are available.
For complete information, contact us for details.